Master-S (Tap water inlet)
Master-S series ultra pure water system (Tap water inlet)
|
Model
|
Standard
|
Eliminating endotoxin
|
Low TOC
|
Comprehensive
|
|
Master-S
|
Master-S UF
|
Master-S UV
|
Master-S UVF
|
|
Master-S plus
|
Master-S plus UF
|
Master-S plus UV
|
Master-S plus UVF
|
|
Flow procedure
|
PF+KDF+AC+RO+AC
|
PF+KDF+AC+RO+AC
|
PF+KDF+AC+RO+UV
|
PF+KDF+AC+RO+UV
|
|
+DI+TF
|
+DI+UF+TF
|
+AC+DI+TF
|
+AC+DI+UF+TF
|
|
Application
|
GC,HPLC,IC,ICP
|
Molecular biology
|
HPLC,IC,ICP-MS
|
HPLC,IC,ICP-MS,CF-AAS, Physics, electrochemistry, Molecular biology, Cell cultivation
|
|
PCR, weather analysis
|
Cell and tissue cultivation
|
TOC and organism analysis
|
|
Amino acid analysis
|
Life science, IVF
|
CF-AAS, toxicology study
|
|
Reagent preparation
|
electrophoresis
|
Environmental analysis
|
|
Ultrapure water
|
Resistivity
|
18.2MΩ.cm@25°C
|
|
quality
|
Heavy metal
|
< 0.1ppb
|
|
|
TOC
|
<10 ppb
|
<3 ppb
|
|
|
Bacteria
|
<1CFU/ml
|
|
|
Endotoxin
|
-
|
<0.001EU/ml
|
-
|
<0.001EU/ml
|
|
|
Particle(>0.22µm)
|
<1/ml
|
|
RO water quality
|
< TDS(ppm,mg/l) of tap water×5%
|
|
Technical
|
Output(25°C)
|
15 Liters/hour* (plus model:30 Liters/hour*)
|
|
specification
|
Flow rate
|
2 Liters/min(with pressure tank)
|
|
|
Pure water outlet
|
RO water, ultrapure water
|
|
|
Dimension/Weight
|
L×W×H:50×36×54cm/20-30Kg
|
|
|
Electric requirements
|
AC110-220V,50/60Hz,120W
|
|
Control
|
Mode display
|
Power on, program, inlet rinse, producing, full, circle, regular outlet, disinfection, consumables replacing remind
|
|
system
|
Safety
|
low pressure and full water alarm, password, auto-reset, outlet forbidden when alarm or disinfection
|
|
|
System monitor
|
Monitoring quality of feed water, RO water and ultrapure water, temperature, used and left time of consumables
|
|
Feed water requirement
|
Tap water, inlet TDS<200 ppm,5-45°C, 1.0-4.0 kgf/cm2
|
|
(if inlet TDS>200ppm,extra pretreatment is recommended)
|
|
Purification
|
Pretreatment unit
|
5µm spun fiber filter×1+Kinetic degradation fluxion filter×1+Granular active carbon filter×1
|
|
system
|
RO unit
|
100 GPD RO membrane×1 ( Plus model:100 GPD RO membrane×2)
|
|
|
Subsequent unit
|
Post active carbon filter×1+Ultrapure polishing resin cartridge× 4+(0.45+0.2) µm terminal filter×1
|
|
|
UV model:+Double wavelength(185&254)nm UV cartridge×1
|
|
|
UF model:+5000 Doulton UF cartridge×1
|
|
|
UVF model:+Double wavelength(185&254)nm UV cartridge×1+5000 Doulton UF cartridge×1
|
|
Standard configuration
|
Main body(including:1 set cartridge)+4 gallon tank+ accessory box
|
| |
|
|
|
|
|
|
* Feed water :TDS200ppm, 25℃, 50psi and 15% recovery rate.
* GPD=gallon per day, 1gallon=3.8L.
*The quality of feed water will influence outlet water quality and cartridge’s life.
* PF: Pretreatment, KDF: Kinetic degradation fluxion, AC: Active carbon, RO: Reverse osmosis, DI: Deionization, UV:UV lamp(Double wavelength:254&185nm), UF: Ultra-filtration TF: Terminal filter
Flow chart:
|
Home