Master-Q (Tap water inlet)
Master-Q series deionized pure water system (Tap water inlet)
|
Model
|
Deionized water purification system
|
|
Master-Q
|
Master-Q UT
|
Master-Q plus
|
Master-Q plus UT
|
|
Flow procedure
|
PF+KDF+AC+RO+AC+DI
|
PF+KDF+AC+RO + UV+AC + DI +TF
|
PF+KDF+AC+RO+AC+DI
|
PF+KDF+AC+RO + UV+AC + DI +TF
|
|
Application
|
Ware washing, Agricultural expe, General biological expe, Aquatic products feeding, Inlet water for Ultra pure water machine, Inlet water for sterilizer/T&H chamber, Buffer disposing, Aseptic drinking water, Physical and chemical analysis, Fine chemistry industry, Inlet water for Ultra pure water machine, GC/HPLC, Pharmacy research, Medicine examining
|
|
DI water quality
|
Resistivity
|
16-18.2MΩ.cm
|
|
Heavy metal ions
|
0.1ppb
|
|
TOC
|
30 ppb
|
|
Bacteria
|
-
|
1CFU/ml
|
-
|
1CFU/ml
|
|
Particle(>0.22μm)
|
-
|
1/ml
|
-
|
1/ml
|
|
RO water quality
|
< TDS(ppm, mg/l) of tap water×5%
|
|
Technical
|
Output(25℃)
|
15 Liters/hour*
|
30 Liters/hour
|
|
specification
|
Flow rate
|
2 Lliters/min(with pressure tank)
|
|
|
Pure water outlet
|
RO water, deionized water
|
|
|
Dimension/weight
|
Length×Width×Height:50×36×54cm / 20-30Kg
|
|
|
Electric requirements
|
AC110-220V,50/60Hz,120W
|
|
Control
|
Mode display
|
Power on, program, inlet rinse, producing, full, circle, regular outlet, disinfection, consumables replacing remind
|
|
system
|
Safety
|
Low pressure and full water alarm, password, auto-reset, outlet forbidden when alarm or disinfection
|
|
|
System monitor
|
Display quality of feed water, RO water and ultrapure water, temperature, used and left time of consumables
|
|
Feed water requirements
|
Tap water, inlet TDS<200 ppm,5-45℃,1.0-4.0kgf/cm2
|
|
(if inlet TDS>200ppm, extra pretreatment is recommended)
|
|
Purification
|
Pretreatment unit
|
5μm spun fiber filter×1+Kinetic degradation fluxion filter×1+Granular active carbon filter×1
|
|
system
|
RO unit
|
100 GPD RO membrane×1 ( Plus model: 100 GPD RO membrane×2)
|
|
|
Subsequent unit
|
Post active carbon filter×1+Mixed bed resin cartridge×3{Plus model: Mixed bed resin cartridge×4}
|
|
|
UT model:+254nm wavelength UV lamp cartridge×1+(0.45+0.1) μm terminal filter×1
|
|
Standard configuration
|
Main body(including:1 set cartridge)+4 gallon tank+ accessory box
|
§ Inlet water :TDS=200ppm, 25°C, 50psi and 15% recovery rate.
§ GPD=gallon per day 1gallon=3.78L.
§ The quality of inlet water will effect output’s and cartridge’s life.
§ PF:Pretreating, KDF:Kinetic degradation fluxion, AC:Active carbon, RO:Reverse osmosis, DI:Ion exchange, UV:Ultraviolet, TF:Terminal filte
Flow chart:
|
Home